Angle valves are also called triangle valves, angle valves, and angled water valves. They are mostly used for water and electricity installation in the decoration industry. They are important plumbing fittings. use 1. Civil use Angle valve for heating pipes Angle valve for heating pipes (2 photos) The angle valve mainly serves four functions: 1 transfer inside and outside the water outlet; 2 The water pressure is too large, it can be adjusted on the triangle valve, and the pressure is small; 3 The role of the switch, if the faucet leaks and other phenomena, you can turn off the triangle valve, do not have to close the main valve in the home; 4 beautiful and generous. Therefore, the general new house decoration is an essential plumbing fitting, so the designer will also mention it when decorating the new house.
2, industrial use The valve body of the angle valve has three inlets, a water quantity control port and a water outlet port, so it is called a triangular valve. Of course, the angle valve is constantly improving, although there are still three mouths, but there are angle valves that are not angled. Industrial angle valve: The angle control valve is similar to the straight-through single-seat control valve except that the valve body is at right angles. Characteristics 1. The flow path is simple, and the dead zone and the eddy current zone are small. By means of the scouring action of the medium itself, the blockage of the medium can be effectively prevented, that is, the self-cleaning performance is better; 2, the flow resistance is small, the flow coefficient is larger than the single seat valve, which is equivalent to the flow coefficient of the double seat valve; It is suitable for applications with high viscosity, suspended solids and granular fluids, or where it is required for right angle piping. The flow direction is generally bottom-in and side-out. In special cases, it can be reversed, that is, flowing to the side. The triangular valve is hot and cold (different from the blue and red signs). Most of the materials are the same. The hot and cold signs are mainly used to distinguish which is hot water and which is cold water.